News -

Home / News (Page 9)

What are the precautions for nylon vacuum bag making operations? (2)
27-07-2020
1. After the temperature reaches the normal set value, turn on the machine and compare with the sample bag to check the quality indicators of the product (sealing position size, sealing knife width, sealing strength, pun...
How to prevent bubbles from appearing when the aluminum foil bag is dry laminated? (1)
03-08-2020
During dry compounding, there are many reasons for bubbles in aluminum foil bags, such as film and ink. Printing process, adhesives, composite process, laminating machine tooling, and workshop environment are all "culpri...
How to prevent bubbles from appearing when the aluminum foil bag is dry laminated? (2)
11-08-2020
1. In daily operation, take care of the tooling, and pay attention to the maintenance and maintenance of the tooling. Clean the tooling in time before driving and before and after stopping each time. Use a clean soft cot...
What is the reason for the horizontal wrinkles after the aluminum foil bag is compounded? (1)
17-08-2020
1. The tension of the two base membranes is not suitable for compounding. One of the base membranes is strong and the other is small. After being compounded, the original film with high tension shrinks, while the other f...
What is the reason for the horizontal wrinkles after the aluminum foil bag is compounded? (2)
24-08-2020
1. The initial viscosity of the adhesive itself is insufficient, and the cohesion is too small The tunneling effect caused by this reason is to solve the problem by improving the quality of the adhesive. Today’s adhesive...
What are the common failures of the gravure printing equipment of the vacuum bag manufacturer? (1)
31-08-2020
Repairing the moving parts of printing equipment is dangerous, and improper operation may cause serious accidents, including life safety. Therefore, the vacuum bag manufacturer must be familiar with the contents of the m...

GET YOUR FREE QUOTE

Contact Us